Glendale Ignition Interlock Device
Contents
- 1 Glendale Ignition Interlock Device
- 1.1 What is an Ignition Interlock Device?
- 1.2 Why am I Required to Have an IID in Glendale?
- 1.3 How Does an Ignition Interlock Device Work?
- 1.4 Getting an Ignition Interlock Device in Glendale
- 1.5 Using Your Ignition Interlock Device
- 1.6 What Happens If I Fail a Test?
- 1.7 Other Ignition Interlock Requirements
- 1.8 Getting Your Ignition Interlock Removed
- 1.9 The Bottom Line
Glendale Ignition Interlock Device
Having an ignition interlock device installed in your vehicle can be a frustrating experience. But it doesn’t have to be! This article will walk you through everything you need to know about ignition interlock devices in Glendale, CA.
What is an Ignition Interlock Device?
An ignition interlock device (IID) is a breathalyzer that is connected to a vehicle’s ignition system. It prevents the vehicle from starting if it detects alcohol on the driver’s breath. IIDs are typically required for drivers convicted of DUIs as a condition of restoring their driving privileges. Some key facts about IIDs:
- Prevents vehicle from starting if a minimum BAC level is detected, usually 0.02%
- Requires periodic re-tests while driving
- Records all activity and violations
- Designed to prevent drunk driving recidivism
Why am I Required to Have an IID in Glendale?
If you have been convicted of a DUI in California, you will most likely be required to install an IID as a condition of reinstating your driver’s license. This requirement applies to first-time and repeat DUI offenders. The length of time you must have an IID varies based on factors like:
- Number of prior DUI convictions
- Injury or death caused by the DUI
- BAC level at time of arrest
- If there was a minor passenger in the vehicle
The court or DMV will notify you if the IID requirement applies. You cannot legally drive until the device is installed and you receive restricted driving privileges.
How Does an Ignition Interlock Device Work?
An IID has two main components – a handheld breathalyzer device and wiring that connects it to your vehicle’s ignition. Here is how it works:
- Turn vehicle ignition to “on” position
- Blow into breathalyzer device until it signals a sufficient sample
- If no alcohol is detected, vehicle will start
- Random re-tests required while driving
- If alcohol detected, vehicle will not start or will log a violation
The devices are highly accurate and can detect even small amounts of alcohol. The minimum BAC threshold in California is 0.02%. If you fail the breath test for any reason, the device will not allow the vehicle to start.
Getting an Ignition Interlock Device in Glendale
Once you are notified that you must install an IID, you must select a state-approved provider. There are a few steps to getting set up:
- Choose an approved provider from the CA DMV’s list.
- Contact them to schedule an installation appointment.
- Bring required documentation to your appointment – license, registration, court order for IID if applicable.
- Technician will install device and explain how to use it.
- Receive proof of installation to provide to the DMV.
There are several approved providers with installation locations in the Glendale area:
Using Your Ignition Interlock Device
Once the IID is installed, you will need to provide breath samples when operating the vehicle. Here are some tips for proper use:
- Wait 15 minutes after eating, drinking, or smoking before providing a sample
- Blow steady, forceful breaths until the device signals completion
- Hum while blowing to avoid errors from saliva/moisture
- Pull over safely before re-test prompts while driving
- Keep battery charged and devices clean
The initial breath sample is required before starting the vehicle. The device will prompt random re-tests while you are driving – usually every 30-60 minutes. These re-tests prevent anyone else from operating the vehicle after initial startup.
What Happens If I Fail a Test?
If you fail a breath test for any reason, the device will enter a temporary lockout period where the vehicle cannot be started. Reasons for failing can include:
- Detecting alcohol over the limit
- Not providing a proper sample
- Attempting to tamper with the device
- Allowing someone else to start the vehicle
The IID will log all violations. Too many failures can result in your restricted license being revoked. You may need to promptly return to the service center if violations occur.
Other Ignition Interlock Requirements
In addition to passing the breath tests, there are some other requirements of the IID program to be aware of:
- Devices must be calibrated and serviced every 30-60 days
- Monthly lease fees apply for the duration of the order
- Lengthy lockout periods can occur for major violations
- Tampering with or circumventing the IID can lead to criminal charges
- Driving any vehicle without an IID during order terms is prohibited
Make sure you follow all the calibration, service and re-testing requirements so you stay in compliance. The court or DMV will receive reports on any violations that occur.
Getting Your Ignition Interlock Removed
Once your IID order has ended, you must return to the service center to have the device removed. They will disconnect it from your vehicle and provide documentation that it has been uninstalled. Some tips for removal:
- Schedule removal appointment within 5 days of order end date
- Keep lease payments current to avoid collection issues
- Obtain court or DMV approval to remove device if needed
- Confirm IID was active with no violations for final month
- Receive certificate of removal to provide to DMV
Once you have the documentation that the IID has been removed, your regular driving privileges can be fully reinstated! Just make sure you never drive under the influence again.
The Bottom Line
Having an ignition interlock device is inconvenient, but a small price to pay compared to losing your license. Follow all the program rules, use the device as instructed, and keep accurate service records. With some patience and planning, you can successfully complete the IID program and get back on the road!